Recommended:
Check out our new X-417 model!
Better user interface, more features, lower price.
For any questions or concerns our sales department.
Overview
The X-317™ is a web-enabled analog output module with five output channels. The analog outputs are similar to that of a Programmable Logic Controller (PLC). However, unlike a PLC, the X-317 is designed for web-based applications from the ground up. No add-on software or hardware is required. The X-317 can be fully configured, programmed and tested using its built-in web server. The web setup pages are intuitive and easy-to-use and do not require special programming skills.
The X-317 can be used as a stand-alone device as well as operate as a peripheral for other devices such as a programmable logic controller (PLC) or the X-600M™.
The X-317 has five precision 16-bit digital-to-analog converters (DACs). Each channel can be programmed for 0-5V, 0-10V, ±5V, ±10V, 4-20mA ranges. The voltage and current outputs for each channel are on a single connector terminal.
Most industrial analog applications require isolation between the power supply and analog outputs. The X-317 has a built-in DC-DC converter for providing isolated power to the outputs. No external isolated back plane power is needed.
The built-in web setup pages allow the name and settings for each channel to be configured. You can configure the range of a setting to be in engineering units. For example, an input value of 0 to 100% can be scaled and processed for an output range of 4-20mA to control a damper motor.
Features
- Built with:
- Industrial grade components
- High-reliability SLC flash
- Transient protection
- Watchdog timers
- Voltage supervisor circuitry, etc.
- Five separate analog output channels
- 0-5V, 0-10V, ±5V, ±10V, 4-20mA output ranges
- Outputs are software configured, independently programmable and scalable
- Built-in isolated DC-DC converter
- Wide power supply range (9-28VDC)
- No special software or device drivers required
- Built-in password protected web setup and control pages
- Static or DHCP IP address configuration
- XML and Modbus/TCP
- Field updatable
- Removable terminal connector
- Rugged DIN-Rail/wall-mountable enclosure
