Overview
This user-friendly display is compatible with select ControlByWeb devices and does more than simply display its sensor’s readings. Features include the ability to alter sensor settings using the Modbus registry and to power a sensor with its batteries. Works on any Modbus network.
Easy to use
The display is controlled by three buttons that allow you to cycle through, select options, and input data.
Remote Applications
The MND is capable of providing display functions to our remote Internet-connected sensors.
Local Applications
The MND display is also capable of acting as a Modbus Master in exclusively local applications. The display’s 9V battery not only powers the display itself but also supplies power to the connected Modbus sensor.
Features
- Easy 3-button programming
- User-selectable units of measure
PERFORMANCE
- RS-485: 9600 baud (Modbus RTU)
- Display readings: Volume | Level | Distance | Pressure
ELECTRICAL
- Battery Option: 9V Lithium | 3.6V Lithium | Low battery detection with 25% increments
- External Power Option: 9-28 VDC
INTERNET CONNECTIVITY
- NO CLOUD NEEDED! Remote connection available with ControlByWeb devices (see below)
PROGRAMMING
- Automatic programming via ControlByWeb device
PHYSICAL
- Size: 3.25” x 1.6” (82.6 x 40.6 mm)
- Display: 5 digit LCD, 0.4 in. digits
ENVIRONMENTAL
- Environmental Protection: IP67
- Operating Temp: 0°F to 160°F (-18°C to 71°C)
- Storage Temp: -30°F to 160°F (-34°C to 71°C)
INSTALLATION
- Top of tank | Head pressure | Simple to install and program
DOWNLOADS
Compatible Products
Connect the MND to one of the following ControlByWeb products: