The X-17S™ expansion module is used with an X-400™ or X-600M™ controller. The four relays have Form-A contacts (SPST) and can be used to control moderate loads. Each input is optically isolated and allow the grounding system of equipment and the low-voltage circuits of the X-17S to be electrically separate. One or more X-17S expansion modules can be connected with a ribbon cable that provides both power and communication.
The X-17S is a versatile expansion module, offering the flexibility to monitor sensors and control devices over a network when paired with the X-400 or X-600M. Common applications include center pivot, simple tank monitoring, and moderate-light loads like solenoid valves, alarms, and indicator lights.
The X-400™ is a web-enabled controller that allows for up to 32 added expansion modules and/or remote I/O devices. Expansion modules are connected directly to the X-400 via ribbon cable, or remotely with other CBW devices via P2P—allowing for monitoring and control of up to 64 I/O.
The X-400C offers wireless capability with a built-in cellular modem.
Expandable, Up to 64 I/O
Relays, Analog & Digital Inputs
Up to 16 temp sensors
Cellular version available
[frequentlyBought ids="7635,34491,7624,7577"]
View Product
This product has multiple variants. The options may be chosen on the product page
The X-600M™ is one of the most capable and flexible ControlByWeb PLCs. Add up to 64 expansion modules and remotely monitor and control up to 1,024 I/O. Create custom logic through the X-600M interface and run your application through a built-in web server and web browser.
Expandable, Up to 1,024 I/O
Relays, Analog/Digital/Thermocouple Inputs
Up to 32 Temperature Sensors
GUI Dashboard
[frequentlyBought ids="7635,7621,7318,7289"]
View Product
This product has multiple variants. The options may be chosen on the product page
(Example images are shown. Label and terminal connector may differ)
Specifications
Power Requirements
Voltage: 9-28 VDC (supplied via the X-400 or X-600M controller, 24V recommended)
Max Current: See table below for typical values at 25°C.
Power Supply
All Opto-couplers & Relays OFF
All Opto-couplers & Relays ON
9 VDC
18 mA
224 mA
12 VDC
14 mA
165 mA
24 VDC
8 mA
86 mA
Relay Contacts
Number of Relays: 4
Max Voltage: 125VAC, 30VDC
Max Current: 2.5A
Contact Type: SPST (Form A)
Load Type: General purpose
Contact Resistance: < 100 milliohms initial
Contact Material: AgSnO2
Electrical Life: 100K operations (Min)
Mechanical Life: 5M cycles (Min)
Environmental Rating: Over voltage Category II, Pollution Degree 2
Relay Modes: On/Off or Pulsed
Pulse Timer Duration: 0.1 to 86,400 Seconds (1-day)
Digital Inputs
Number of Inputs: 4
Type: Optically-Isolated
Voltage Range: 3-26VDC
Current: 0.6mA @ 3V, 8.2mA @ 26V
Minimum Hold Time: 2.5mS
Input Isolation: 1500V
Input Functions: Monitor State, Control Relays, Control Remote Relays, Count, Frequency, High Time, ON Time
Maximum Count: 32-bit
Max Count Rate: 200Hz
Edge Trigger: Rising, Falling or Both
High Time: Pulse width (4,194,304 seconds max)
On Time: Accumulated time an input is asserted (4,194,304 seconds max)
For your convenience we have set up a live X-600M unit connected to several expansion modules (i.e., X-11S, X-12S, X-13S, X-15S,and X-16S). The X-17S will be connected and used similarly to these expansion modules. These expansion modules contain a variety of inputs and outputs that allow you to see how the X-600M works with its expansion modules. By clicking the links below you have full access to these live units. You can make changes to the configuration and settings through the setup pages and you can control the expansion modules’ relays, and view the current status of the inputs, and monitor temperature (X-600M & X-13s) through its dashboard page.
The diagrams illustrate how this demonstration is wired. The relays on all expansion modules are not connected to a load; however, you can still access and control the relays by turning them on or off through the X-600M dashboard. The X-600M is also wired to a temperature sensor, and the X-13s is connected to a thermocouple. Both sensors can be monitored on the X-600M’s dashboard. The digital input states on the X-15s only changes when a voltage is applied to the inputs. For this demonstration, we have connected one of our X-332 controllers to Input 1 on the X-15s. You can apply a voltage to this input by accessing the control page for the X-332 (Digital Input Control Page).
Important Information
Multiple users may be accessing this device simultaneously so the device can change while you are using it.
This unit will be reset to factory defaults daily at 2:30AM MST.
Please DO NOT change network or password settings.
Simplify any industrial application with the X-410™—no code necessary. Automation is easy with its browser-based interface and intuitive drop-down menus for creating event-based and scheduled logic. Monitor dry contacts and control relays with built-in I/O. Extend functionality by adding other ControlByWeb devices with P2P communication.
4 Relays & 4 Digital Inputs
Up to 16 Temperature Sensors
Ethernet, Cellular, or WiFi
9-28VDC and/or POE
Cellular and WiFi are Now Available. Note that X-410CW and X-410W models include cellular and WiFi capability respectively, which allows for more flexibility for your application.
[frequentlyBought ids="7624,34491,7540,7798"]
View Product
This product has multiple variants. The options may be chosen on the product page
🦃 Our office will be closed November 28–29 in observance of Thanksgiving. Orders placed during this time will be processed on Monday, December 2.Dismiss
Manage Consent
To provide the best experiences, we use technologies like cookies to store and/or access device information. Consenting to these technologies will allow us to process data such as browsing behavior or unique IDs on this site. Not consenting or withdrawing consent, may adversely affect certain features and functions.
Functional
Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
