X-20S™ | 6 Relay, 6 Digital Input Expansion Module
$309.99
The X-20S™ expansion module is used with an X-400™ or X-600M™ controller. It has six high-current relays, each with Form-C contacts (SPDT), and six optically isolated digital inputs. Screw terminal strips provide connections to the relays.
The X-20S is suitable for use with controlling relatively heavy loads such as motors, solenoid valves, and lights. Switches can be connected to the X-20S’ digital inputs to locally control these loads. The digital inputs can also be used for other monitoring applications such as limit switches, security sensors, or light switches.
The X-400™ is a web-enabled controller that allows for up to 32 added expansion modules and/or remote I/O devices. Expansion modules are connected directly to the X-400 via ribbon cable, or remotely with other CBW devices via P2P—allowing for monitoring and control of up to 64 I/O.
The X-600M™ is one of the most capable and flexible ControlByWeb PLCs. Add up to 64 expansion modules and remotely monitor and control up to 1,024 I/O. Create custom logic through the X-600M interface and run your application through a built-in web server and web browser.
For your convenience we have set up a live X-600M unit connected to several expansion modules (i.e., X-11S, X-12S, X-13S, X-15S,and X-16S). The X-20S will be connected and used similarly to these expansion modules. These expansion modules contain a variety of inputs and outputs that allow you to see how the X-600M works with its expansion modules. By clicking the links below you have full access to these live units. You can make changes to the configuration and settings through the setup pages and you can control the expansion modules’ relays, and view the current status of the inputs, and monitor temperature (X-600M & X-13S) through its dashboard page.
The diagrams illustrate how this demonstration is wired. The relays on all expansion modules are not connected to a load; however, you can still access and control the relays by turning them on or off through the X-600M dashboard. The X-600M is also wired to a temperature sensor, and the X-13S is connected to a thermocouple. Both sensors can be monitored on the X-600M’s dashboard. The digital input states on the X-15S only changes when a voltage is applied to the inputs. For this demonstration, we have connected one of our X-332 controllers to Input 1 on the X-15S. You can apply a voltage to this input by accessing the control page for the X-332 (Digital Input Control Page).
Important Information
Multiple users may be accessing this device simultaneously so the device can change while you are using it.
This unit will be reset to factory defaults daily at 2:30AM MST.
Please DO NOT change network or password settings.
Simplify any industrial application with the X-410™—no code necessary. Automation is easy with its web-based interface, intuitive drop-down menus, and logic editor. Integrate different devices, sensors, and protocols to create a cohesive system that responds intelligently to changing conditions. Control lights, sensors, and more with built-in I/O and expandable modules.
4 Relays
4 Digital Inputs
Up to 16 Temp Sensors
WiFi is Now Available. Note that X-410W models include WiFi capability which allows for more flexibility and cost savings for your application.