WebRelay Wireless™ | Single Relay & Input Module

WebRelay Wireless™ WiFi-enabled single relay and input module with temperature sensor support

$219.99

The WebRelay Wireless™ is a WiFi-enabled electromechanical relay with a built-in web server and optically isolated digital input.

1 Relay (12A 277VAC, 30 VDC)

1 Digital Input (4-26 VDC)

Up to 4 Temperature Sensors (-67°F to 257°F / -55°C to +125°C)

Frequently Bought Together
12VDC Power Supply
Power Supply | 12VDC
Water-Resistant Digital Temperature Sensor 1 Meter Long
Water-Resistant Digital Temperature Sensor (1m)
GRI-29C Magnetic Contact Sensor
GRI-29C Indoor Magnetic Contact Sensor

WebRelay Wireless I/O controller used for gate control

Built-in WiFi for Remote I/O

The WebRelay Wireless is ideal for applications where electrical devices must be controlled or where temperature or switch-closure sensors must be monitored, and where Ethernet wiring is not accessible or practical to install. WebRelay Wireless is powered by an external wall transformer (9-28 VDC), solar panel, or other DC power source.

WebRelay Wireless Features

  • Built-In Web Server
  • Peer-to-Peer Communication
  • Email Notifications
  • No-Code Logic Builder

WebRelay Wireless Applications

  • Fridge & Freezer Monitoring
  • Door & Gate Access Control
  • Environmental Monitoring

WebRelay Wireless Case Studies

View All Case Studies
Access Control Thumbnail
Door & Access Control
Learn more
Building Light Automation Image
Building Lights Automation
learn more
Security camera
Security Camera Monitoring & Control
Learn More

Specifications

Power Requirements
  • Voltage: 9-28 VDC
  • Max Current: 188 mA Max
Wireless
  • Network Standards: IEEE 802.11 b/g/n
  • Frequency Band: 2.412 – 2.462 GHz
  • Wi-Fi Security Standards: Open, WEP, WPA, WPA2
  • Network Settings: DHCP or Static
  • Wireless Range: Up to 250ft (typical for Wi-Fi devices) depends on environment
  • Antenna (included): External, 2.4 GHz, 50Ohm, omni directional, 1/4 wavelength, gain: ≤ 2.1dBi. With articulated reverse SMA connector.
  • RF Output Power (typ): 14dBM (802.11b/g), 12dBM (802.11n)
Operation
  • Provisioning: Via internal web server (no cables or PC utilities needed)
  • Access Point: Yes, push button activated (setup via web page)
  • WPS: Yes, push button activated (Wi-Fi Protected Setup)
  • Connectivity: Always connected
  • Remote Server: ControlByWeb’s X-600M™, or cloud-based server
  • Polling: state.xml (web-server is always active)
Relay Contacts
  • Number of Relays: 1
  • Max Voltage: 277VAC, 30VDC
  • Max Current: 12A
  • Contact Type: SPDT (Form C)
  • Load Type: General Purpose
  • Contact Resistance: < 30 milliohms initial
  • Contact Material: AgSnO2
  • Electrical Life: 100K cycles (Typical)
  • Mechanical Life: 10M cycles (Typical)
  • Environmental Rating: Over voltage Category II, Pollution Degree 2
  • Relay Modes: ON/OFF or Pulsed
  • Pulse Timer Duration: 0.1 to 86,400 Seconds (1-day)
Digital Inputs
  • Number of Inputs: 1
  • Type: Optically-Isolated
  • Voltage Range: 4-26 VDC
  • Current: 950uA @ 4V, 8.5mA @ 26V
  • Minimum Hold Time: 25mS
  • Input Functions: Monitor, Local Relay Control, Remote Relay Control
  • Maximum Count: 24-bit
  • Max Count Rate: 20Hz Max (Dependent on Configuration)
  • Edge Trigger: Rising, Falling or Both
Temperature Sensors
  • Maximum Number of Sensors: 4
  • Type: Dallas Semiconductor DS18B20
  • Temperature Range: -67°F to 257°F (-55°C to +125°C)
  • Accuracy: ±0.5°C (from -10°C to +85°C)
  • Sensor Functions: Monitor Temperature, Email Alerts, Control Relays
  • Humidity Type: Xytronix Model X-DTHS-P sensor
  • Humidity Range: 0-100% RH
  • Accuracy: ±2%
Real-Time Clock
  • Manual or NTP(Network Time Protocol) setup
  • NTP Sync Period: Once, Daily, Weekly, On Powerup
  • Auto Daylight Savings Adjustment
Connectors
  • Relay: 3-Position Removable
  • Power/Input/Temperature: 8-Position, 3.81mm terminal spacing, Removable. For 16-28 AWG wire.
Push Buttons
  • Button 1: Force access-point mode
  • Button 2: Activate WPS mode
LED Indicators
  • Number of LEDs: 4
    • Power on
    • Relay coil energized
    • Digital Input
    • Network linked
Physical
  • Operating Temperature: -40°F to 135°F (-40°C to 57°C)
  • Storage Temperature: -40°F to 185°F (-40°C to 85°C)
  • Humidity: 5% to 95% non condensing
  • Size:
    • 1.41in (35.7mm) wide
    • 3.88in (98.5mm) tall
    • 3.1in (78mm) deep (not including connector)
  • Weight: 5 oz (142 grams)
  • Enclosure Material: Lexan 940 Polycarbonate Plastic
  • Enclosure Flame Rating: UL94 V0
Protocols
  • HTTP, XML, SSL, Modbus TCP/IP, SMTP, Remote Services
Logging
  • Log File Size: 512K
  • Storage: Nonvolatile Flash
  • Buffer Architecture: Circular Buffer

Log data can be periodically read and stored on a computer

Advanced Features
  • BASIC interpreter
  • Remote services
Password Settings
  • Password protection on setup page: Yes
  • Password protection on control page: Optional
  • Password Encoding: Base 64
  • Password Length: 13 Characters
Electromagnetic Compliance
  • FCC ID: 2AE4Z-XWD002
  • FCC 47CFR15 (Class B)
  • IEC CISPR 22, CISPR 24
  • EN55024 ITE Immunity (2010)
  • EN55022 Emissions (2010)
  • IC: 21441-XWD002
  • EMC95120-ETSI328 (Australia)
  • EMC95120-IEC62311 (Australia)
Product Safety Compliance
  • UL 61010-1 (Electrical Equipment for Measurement, Control, and Laboratory Use)

Manuals & Downloads

User’s Manuals

Webrelay Wireless Users Manual

WebRelay Wireless Quick Start Guide (PDF)

Catalog

WebRelay Wireless Data Sheet (PDF)

ControlByWeb Product Catalog

Downloads

Utilities

CBW Settings Utility
This utility allows you to download settings and/or events from one of our stand-alone ControlByWeb products to your computer, and then upload them to a device of the same model number, and firmware revision. (Not compatible with the X-600 Modular Series.)

3D Model

WebRelay Wireless 3D Model (.stp)

Accessories

 

24V DIN Rail Power Supply

24V DIN Rail Power Supply

$74.99

View Product
5VDC Water Sensor

5VDC Water Sensor

$29.99

View Product
Cloud Seat Icon

ControlByWeb Cloud Device Seat

$11.99

View Product
GRI-28C Magnetic Sensor

GRI-28C Indoor Magnetic Contact Sensor

$21.99

View Product
GRI-29C Magnetic Contact Sensor

GRI-29C Indoor Magnetic Contact Sensor

$21.99

View Product
GRI-4402 A Wide Gap Magnetic Sensor

GRI-4402-A Industrial, Wide-Gap Magnetic Sensor

$59.99

View Product
GRI-4701 A Garage Door Magnetic Sensor

GRI-4701-A Garage Door Magnetic Contact Sensor

$69.99

View Product
MPS indoor magnetic sensor

MPS Indoor Magnetic Contact Sensor

$14.99

View Product
12VDC Power Supply

Power Supply | 12VDC

$19.99

View Product

For your convenience we have set up a live WebRelay Wireless unit for testing and evaluation. By clicking the links below you have full access to this live unit. You can make changes to the configuration and settings through the setup pages and you can control WebRelay Wireless through its control page. The control page allows you to change the state of the relay and view the current state of the input.

Self Guided Demo With Login and Video

*Setup page login information:

Username: admin

Password: webrelay

Control Page
Setup Pages*
Digital Input Control Page

WebRelay Wireless live demonstration setup

Live Demo With One of Our Sales Engineers

Let’s make it easy with a live demo and screen sharing.

Set up a one-on-one Q & A with one of our experts. We’ll help you find the best solutions for your next project and walk you through a demonstration.

Schedule Free Consultation

 

Low on time? Watch a pre-recorded demo instead:

WebRelay Series Setup and Programming Demo

WebRelay Wireless Setup

The diagram illustrates how this demonstration is wired. Nothing is connected to the relay contacts; however, you can still turn the relay on and off to see how it works. The input state only changes when a voltage is applied to the input. For this demonstration, we have connected one of our X-332 controllers to the input of the WebRelay. You can apply a voltage to the input of the WebRelay by accessing the control page for the X-332 (Digital Input Control Page). Important Info about devices resetting

Important Information

  • Multiple users may be accessing this device simultaneously so the device can change while you are using it.
  • This unit will be reset to factory defaults daily at 2:30AM MST.
  • Please DO NOT change network or password settings.

Related Products…

  • WebRelay single relay and input module with Ethernet, cellular, or WiFi connectivity

    WebRelay™ | Single Relay & Input Module

     $189.99 – $289.99
    The latest WebRelay™ has been updated with powerful firmware, as well as cellular and wifi options, making it an incredibly capable wireless remote control relay. The browser-based user interface and open REST API makes the WebRelay the simplest web-enabled relay for IIoT and Edge applications.

    1 Relay & 1 Digital Input

    Ethernet, Cellular, or WiFi

    9-28VDC and/or POE

    Note that the new models run the 400 Series firmware on the same great hardware, while the original WebRelay runs the previous firmware with no cloud access, a simpler browser interface, and no programmable logic or data logging.

    [frequentlyBought ids="7624,7621,7798,34091"]

    View Product This product has multiple variants. The options may be chosen on the product page
  • Single X-410 with Cell, WiFi, and POE icons

    X-410™ | Edge Programmable Controller

     $299.99 – $399.99
    Simplify any industrial application with the X-410™—no code necessary. Automation is easy with its browser-based interface and intuitive drop-down menus for creating event-based and scheduled logic. Monitor dry contacts and control relays with built-in I/O. Extend functionality by adding other ControlByWeb devices with P2P communication.

    4 Relays & 4 Digital Inputs

    Up to 16 Temperature Sensors

    Ethernet, Cellular, or WiFi

    9-28VDC and/or POE

    Cellular and WiFi are Now Available. Note that X-410CW and X-410W models include cellular and WiFi capability respectively, which allows for more flexibility for your application.

    [frequentlyBought ids="7624,34491,7540,7798"]

    View Product This product has multiple variants. The options may be chosen on the product page
  • X-401 with Cell, WiFi, and POE icons

    X-401™ | Dual Relay and Input Module

     $269.99 – $369.99
    The X-401™ has two SDPT relays (form C) and two optically isolated inputs. It also shares the same benefits as other 400 series devices, which includes a built-in web server and simple, no-code logic builder. Monitor locks and lights, reboot devices like IP cameras, control bells and alarms, and much more with the X-401.

    2 Relays & 2 Digital Inputs

    Ethernet, Cellular, or WiFi

    9-28VDC and/or POE

    Cellular and WiFi are Now Available. Note that X-401CW and X-401W models include cellular and WiFi capability respectively, which allows for more flexibility for your application.

    [frequentlyBought ids="7624,7621,7798,34091"]

    View Product This product has multiple variants. The options may be chosen on the product page
Shopping Cart
×

400 Series Guided Demo

×

Self-Guided, Live Demo of our Products

SETUP PAGES

Use the Setup Page to set up I/O, change settings, and create logic with intuitive dropdown menus.

CONTROL PAGE

Use the Control Page to see I/O status and manually control relays.

*Setup page login information: Username: admin Password: webrelay

Schedule A Guided Walkthrough

Want a little extra guidance? Schedule a 15-minute guided demo with our sales engineers. They’ll show you how it works for your application.